Windows Maintenance Guard

How to remove Windows Maintenance Guard from your computer?

Windows Maintenance Guard is a rogue antivirus software from a family of fake anti-viruses called "FakeVimes". Internet criminals who are responsible for creating this family are continuing to develop new malicious programs - this bogus software is similar to it's previous versions, Cyber criminals are using the same user interface in all of their rogue programs, the only thing that is changed is the name.

The main purpose of releasing Windows Maintenance Guard is to trick PC users into believing that their computers are infected with spyware and malware and then forcing them into activating "ultimate protection" (purchasing a licence key for this program). This rogue software when installed on your computer will make the situation seem like it is the only software that could eliminate all of the supposedly detected security threats on your computer. In reality none of the security infections that are indicated by Windows Maintenance Guard exist on your PC, the security check-up and warning messages are just a part of the trickery displayed by this bogus program. Cyber criminals designed Windows Maintenance Guard to show fake security scan results and scare unsuspecting PC users into believing that their computers are at risk. To achieve this misleading goal Windows Maintenance Guard apart from showing fake information will also block the execution of your installed programs and will change your Task Manager with it's "Advanced Process Control". These modifications makes this rogue program appear more real and also makes the removal process more complicated.

To distribute Windows Maintenance Guard Internet criminals are using misleading websites which either shows fake online security warning messages and prompts you to download this rogue software or uses security vulnerabilities found on your PC to stealthily install this fake security scanner. Other known methods of spreading Windows Maintenance Guard is displaying fake anonymous torrent connection pop-ups and showing fake online security scans. Previous variants of this bogus software which used similar distribution strategy were named Windows Secure Web Patch, Windows Active Defender, Windows Instant Scanner and many other. You should be especially cautious if you notice an online security warning pop-up or a security scan window - most commonly such online messages are fake and are used to spread fake antivirus programs such as Windows Maintenance Guard. Use this removal guide and eliminate this rogue program from your PC.

Windows Maintenance Guard generates such fake warning messages:

"Warning! Virus Detected Threat detected: FTP Server Infected file: C:\Windows\System32\dllcache\wmploc.dll"

"Warning! Identity theft attempt Detected Hidden connection IP: 58.82.12.124 Target: Your passwords for sites"

"Error Key-logger activity detected. System information security is at risk. It is recommended to activate protection and run a full system scan"

Windows Maintenance Guard removal:

Before downloading the remover for Windows Maintenance Guard click a question mark icon at the top of the main window of this program, choose "Activate Now" and enter this registration code: 0W000-000B0-00T00-E0020 This will enable blocked Windows functions and will make the further removal process much easier, after entering the activation code continue to downloading the spyware remover.

remover for Windows Maintenance Guard

If you can't download or run spyware remover try running registry fix (link below). It enables execution of programs. download registryfix.reg file, double click it, click YES and then OK.

Manual Windows Maintenance Guard removal instructions:

Step 1
Start your computer in safe mode. Click Start, then click Shut down. Select Restart and click OK. During your computer starting process press F8 key on your keyboard multiple times until Windows Advanced Options menu shows up, then select Safe mode with networking from the list and press ENTER.

Step 2

Now we need to remove proxy settings. Windows Maintenance Guard adds a proxy to your Internet connection settings to show various errors when you try to access Internet. To do this, open Internet explorer, click Tools and select Internet Options. Then select the "Connections" tab.

In the "Connections" tab, click LAN settings, if a "Use a proxy server for your LAN" is checked, uncheck it and press OK.

Step 3
Download HijackThis and save it on your desktop. Some malicious programs are able to block HijackThis so when you click the download link, in the Save dialog rename HijackThis.exe to iexplore.exe and only then click the Save button. After saving the file on your desktop, double click it. In the main HijackThis window click “Do a system scan only” button. Select these entries (place a tick at the left of the entry):

O4 - HKCU\..\Run: [Inspector] %AppData%\Protector.exe (Protector.exe file may have 3 or more random characters at the end of it's file name like ProtectionGQY.exe)

After selecting required entries, click "Fix Checked" and these entries will be removed. After this procedure you can close HijackThis and proceed to the next removal step.

Step 4
Download a legitimate anti-spyware software to fully remove Windows Maintenance Guard from your computer.

Step 5
After removing Windows Maintenance Guard, you will need to reset your Hosts file. Don't skip this step, this malware modifies your Hosts files, and you will encounter browser redirect problems if malicious entries will not be removed from hosts file.

Hosts file is used to resolve some canonical names of websites to IP addresses. When it is changed, the user may be redirected to malicious site still seeing good URL in address bar. It is very hard to find out if the site is genuine or not, when hosts file is modified. To fix this, please download Microsoft Fix It tool, that restores your hosts file to Windows default. Run this tool when downloaded and follow the on-screen instructions. Download link below:

Finish
After doing all these steps your computer should be clean. Windows Maintenance Guard will be removed.

Other tools known to remove Windows Maintenance Guard:

Some malicious software modifies browser settings and disables downloads of spyware and virus removing software. If you have problems downloading anti-spyware software with Internet Explorer, try downloading with Chrome, FireFox, Opera, etc.

If you can't access Internet:

Load your computer in safe mode. Click Start, click Shut down, click Restart, click OK. During your computer starting process press F8 key on your keyboard multiple times until you see Windows Advanced Option menu, then select Safe mode with networking from the list.

Start Task manager. Press ctrl+alt+del (or ctrl+shift+esc) and end task the processes of rogue program. ( if after this procedure you can't access any programs press ctrl+alt+del, click File, select New Task, and type explorer.exe then press OK.

Open Internet explorer, click Tools and select Internet Options. Select Connections, then click LAN settings, if a Use a proxy server for your LAN is checked, un-check it and press OK.

After this procedure you should be able to access Internet. Now you can download anti-spyware software from our "Top spyware removers" section and run a full scan. Download, install and don't forget to update your selected anti-spyware program. Then run a full system scan.

Manual Windows Maintenance Guard removal:

If you were unable to remove Windows Maintenance Guard using the steps above, you can use this manual removal instruction. Use it at your own risk. If you don't have strong computer knowledge you could harm your operating system. Be careful and use it only if you are an experienced computer user. (Instructions on how to end processes, remove registry entries...)

End these Windows Maintenance Guard processes:

random.exe
Protector.exe (Protector.exe file may have 3 or more random characters at the end of it's file name like ProtectionGQY.exe)

Remove these Windows Maintenance Guard registry entries:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\_avp32.exe
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\ashLogV.exe
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\beagle.exe
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\jedi.exe
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\msa.exe
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\ntvdm.exe
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\rav7.exe
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\spoler.exe
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\vir-help.exe
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\wupdt.exe
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings "WarnOnHTTPSToHTTPRedirect" = 0
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System "DisableRegedit" = 0
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System "DisableRegistryTools" = 0
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System "DisableTaskMgr" = 0
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run "Inspector"
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Settings "net

Delete these Windows Maintenance Guard files:

%StartMenu%\Programs\Windows Maintenance Guard.lnk
%AppData%\Protector.exe (NOTE: this file may have various symbols at the end of it's name. Look for the similar file name pattern and remove it)
%AppData%\result.db
%Desktop%\Windows Maintenance Guard.lnk

Other tips, that might help remove Windows Maintenance Guard

• If you can't download anti-spyware software: Click on the download link, when the save dialog opens change the file name (example: when downloading mbam-setup.exe rename it to iexplore.exe).
• If you have installed anti-spyware program but you can't run it do the following steps:
• Click Run, type %ProgramFiles% and press Enter. Open folder of your anti-spyware program, search for executable file and rename it. (example: Open Malwarebytes’ Anti-Malware folder, right-click on the main executable file (mbam.exe) then click rename. Rename the mbam.exe file to iexplore.exe, winlogon.exe firefox.exe or other known executable file.
• If you can't access your anti-spyware software, try creating a new user account:
  Click Start -> Settings -> Control panel.
  Click User Accounts and create a new account.
  Reboot your computer and log in using a newly created user account.
  After this procedure you should be able to access your anti-spyware programs. Update and run a full system scan.