How To Fix "KMODE_EXCEPTION_NOT_HANDLED" Error?

How To Fix "KMODE_EXCEPTION_NOT_HANDLED" Error On Windows 10?

Blue Screen of Death (also known as a blue screen or BSoD or a STOP error) is an error screen displayed on a Windows computer system after a fatal system error, also known as a system crash: when the operating system reaches a condition where it can no longer operate safely or Windows must stop completely. It usually appears when Windows encounters a critical error and it cannot recover. There is a number of blue screen types and it also depends on the version of Windows operating system.

Blue screens are generally caused by problems with your computer’s hardware or issues with its hardware driver software. At this point there is only one thing that you can do - to restart your computer, but if there is some programs with their data open, Windows won't be able to save it. But there is one thing that will be definitely saved: Windows automatically creates a file called “minidump” that contains information about the crash and saves it to your disk. You can view information about minidumps to help identify the cause of the blue screen. However, a minidump file does not contain as much information as a full crash dump file, but it contains enough information to perform basic debugging operations.

If you are reading this article most probably it is because you got the "KMODE_EXCEPTION_NOT_HANDLED" error. This error is usually a result of newly installed hardware drivers or other newly installed software. This "KMODE_EXCEPTION_NOT_HANDLED" error can also occur during software installation when running Windows or during Windows startup or shutdown. This could mean that there are faulty, corrupt drivers installed on your computer. This error could be caused by corrupted registry in your Windows operating system, damaged system files, damaged hard disk, or even by various virus or malware infections.

Good news is that this error can be fixed quite easily, depending on what exactly caused it, and in this guide we are going to show you several solutions for this "KMODE_EXCEPTION_NOT_HANDLED" error. Read the article below to find the solutions that works for you.

NOTE: If you are stuck on this blue screen and cannot use your Windows operating system, then you need to boot your Windows into Safe Mode before trying anything else. Read this article to find out how to boot into Safe Mode. If you have your Windows installation DVD (or USB) then you can use it to launch Automatic Repair screen (by clicking "Repair your computer" on the Windows Setup window), and to start your Windows in Safe Mode from there. If there is no need to boot your Windows into Safe Mode, then skip it and simply log in to your Windows and follow the described steps below.

KMODE EXCEPTION NOT HANDLED

Table of Contents:

Run Windows Troubleshooter

Windows includes a number of troubleshooters designed to quickly diagnose and automatically resolve various computer problems. Troubleshooters cannot fix all problem, but they are a good place to start if you encounter a problem with your computer or operating system. To start troubleshooting, go to Settings and type "troubleshoot", select "Troubleshoot" from the list.

run windows troubleshooter step 1

Find "Blue Screen" under "Find and fix problems" and select it, click "Run the troubleshooter" and follow the instructions. Restart your computer when finished troubleshooting.

run windows troubleshooter step 2

[Back to Table of Contents]

Run Memory Diagnostic Tool

This "KMODE_EXCEPTION_NOT_HANDLED" error message might appear due to a problem with your Random Access Memory (RAM). If your RAM is failing, then you should consider replacing it, but you need to be sure that this is where the problem exists. There is a built-in Windows tool called Windows Memory Diagnostic. We recommend that you run it to see if there is a problem with your computer memory. To open Windows Memory Diagnostic tool, type "memory" in Search and click on the "Windows Memory Diagnostic" result.

run memory diagnostic tool step 1

You will be given two options: restart your computer now and check for problems immediately or check for problems the next time you start your computer and let it do a scan before loading the Windows operating system. Choose which option suits you. This tool will report you if there are any problems with your RAM.

run memory diagnostic tool step 2

[Back to Table of Contents]

Update Your Drivers

This "KMODE_EXCEPTION_NOT_HANDLED" error might be caused by outdated, faulty or incorrect drivers. In this case, you need to get updated/new drivers for your hardware. There is an easy way to do this automatically with Driver Easy program: it automatically finds the latest, correct drivers for your system. You can look for the correct driver manually, but using this program saves time and is less error prone when choosing a driver for your network adapter. Download Driver Easy from here.

Open installed Driver Easy app and click on "Scan Now". It will scan your system and detect problem drivers. When scan is finished you should see "Update" option next to your devices. Find your outdated drivers and click on "Update" next to it and Driver Easy will download and install the correct/newer/updated driver version.

update your drivers step 1

There's an "Offline Scan" feature which lets you update your drivers without Internet. After you finished updating and installing your outdated drivers, restart your Windows 10 for changes to take effect and see if the "KMODE_EXCEPTION_NOT_HANDLED" error still persists.

You can also update your drivers manually but you will need a computer with a working internet connection or to have your drivers in USB drive. Go to your device manufacturer website and download the latest driver, copy that driver into your USB drive. Go to Device Manager (type "device manager" in Search and open it). Expand your hardware device section, select your driver and right-click on it, then choose "Update Driver".

update your drivers step 2

You will be asked how do you want to search for drivers and given two options - to search automatically for updated driver software and to browse your computer for driver software. Choose the option which suits you the best and follow the instructions. Apply the steps to all your drivers.

update your drivers step 3

Alternatively, you can uninstall the driver by choosing "Uninstall device" and let Windows install drivers for you the next time you start Windows (unless your computer is not connected to the Internet). Ensure that the "Delete the driver software for this device" checkbox is marked when uninstalling the device.

[Back to Table of Contents]

Check Your CPU Voltage

One of the reasons for this "KMODE_EXCEPTION_NOT_HANDLED" error could be your CPU voltage. This method includes changing the BIOS settings or reading the motherboard's manual, and this one is kinda advanced method, so you will need to consult someone who knows how to adjust CPU voltage.

[Back to Table of Contents]

Update Your Windows

Checking for updates for the entire Windows operating system might help to fix the "KMODE_EXCEPTION_NOT_HANDLED" error. To check for Windows Updates, go to Settings and select "Update & Security".

update your windows step 1

You should be automatically directed to the Windows Update section. Click "Check for updates". Windows will start checking for updates. If there are updates available, install them and check for updates again - just to ensure that you have the latest updates on your operating system. Check if this fixes the "KMODE_EXCEPTION_NOT_HANDLED" error.

update your windows step 2

[Back to Table of Contents]

Rename The Problematic File

If the "KMODE_EXCEPTION_NOT_HANDLED" error specifies the file which is causing this problem, then try simply renaming the file. This simple method actually could help you to fix this error. However, you must be sure that renaming the file wouldn't cause more/other problems or make your system unstable. We recommend you to do a research on that particular file before renaming it and if it is not some crucial part of your system, then you can try to rename it and to see if that helps to fix the "KMODE_EXCEPTION_NOT_HANDLED" error.

[Back to Table of Contents]

Check Your Disk For Errors

It is always a good idea to periodically check your disk for errors. There is a built-in tool in Windows tool to check the integrity of disks. It examines disks and corrects many types of common errors. You can run this tool from the command line or through a graphical interface. To run it from the command line, open Command Prompt, type "command prompt" and right-click on the "Command Prompt" result, select "Run as administrator" from the drop-down menu.

check your disk for errors step 1

In Command Prompt window type the "chkdsk C: /f" command and press Enter on your keyboard. Replace "C" with the letter of your hard drive if it is not the C: drive you want to scan (or your Windows operating system is on another drive) on your computer. The "chkdsk C: /f" command detects and repairs logical issues affecting your drive. To repair physical issues, run the "chkdsk C: /r" command as well. See if this helps to fix the "KMODE_EXCEPTION_NOT_HANDLED" error.

check your disk for errors step 2

[Back to Table of Contents]

Run The SFC Scan

Sometimes this "KMODE_EXCEPTION_NOT_HANDLED" error can appear because of the corrupted system files and to fix this issue you need to run SFC scan. System File Checker is a utility in Windows that allows users to scan for corruptions in Windows system files and restore corrupted files. This guide describes how to run the System File Checker tool (SFC.exe) to scan your system files and to repair missing or corrupted system files. If a Windows Resource Protection (WRP) file is missing or is corrupted, Windows may not behave as expected. For example, some Windows functions may not work, or Windows may crash. The "sfc /scannow" option is one of the several specific switches available in the sfc command, the Command Prompt command used to run System File Checker. To run it you need to open Command Propmt first. To open it type "command prompt" in Search and then right-click on the "Command Prompt", select "Run as administrator" from the dropdown menu to run Command Prompt with administrator privileges. You must run an elevated Command Prompt in order to be able to perform SFC scan.

run sfc scan step 1

In opened Command Prompt window type "sfc /scannow" and press Enter on your keyboard to execute this command. System File Checker will start and it should take some time to complete the scan. It should take about 15 minutes. Wait for the scanning process to complete and then restart your computer to see if the "KMODE_EXCEPTION_NOT_HANDLED" error still persists.

run sfc scan step 2

[Back to Table of Contents]

Replace Your RAM

This "KMODE_EXCEPTION_NOT_HANDLED" error message might appear due to a problem with your Random Access Memory (RAM). If your RAM is failing, then you should consider replacing it, but you need to be sure that this is where the problem exists. Find the faulty RAM stick (if there is more than one on your computer) and replace it. Try replacing it with another one or remove one of the sticks and see if you are still getting the "KMODE_EXCEPTION_NOT_HANDLED" error. Try this with all of the memory sticks to find which one possibly causes this error. If you find that one of the memory sticks actually is causing this error, then you should consider replacing it with a new one.

[Back to Table of Contents]

Uninstall BitDefender And Other Software

If you are using BitDefender anti-virus software, then try to uninstall it and see if this "KMODE_EXCEPTION_NOT_HANDLED" error still persists. We are suggesting this only because there are numerous reports where users are stating that this particular software is causing this error. If that is really the case on your computer as well, then we recommend you to change your anti-virus software to another one, or to use Windows built-in Windows Defender. If uninstalling BitDefender does not help you can install it again. If you are using Cisco VPN client, McAfee antivirus software or ON/OFF Gigabyte then try uninstalling them well, since these three could also cause this "KMODE_EXCEPTION_NOT_HANDLED" error.

[Back to Table of Contents]

Run A Full System Scan

Malware may cause various issues on your computer and if SFC scan couldn't fix the "KMODE_EXCEPTION_NOT_HANDLED" error then try performing a full system scan and see if it detects any malware on your computer. You can use Windows Defender (built-in antivirus program) which protects your computer against viruses, spyware, other malicious software. Or you can any other third-party antivirus. To run full system scan using Windows Defender type "defender" in Search and click on the "Windows Defender settings" result. In opened Windows settings click on "Open Windows Defender Security center".

run full system scan step 1

Then click on "Virus & threat protection".

run full system scan step 2

In Virus & threat protection window click on "Advanced scan".

run full system scan step 3

Select "Full scan" and click on "Scan now". This will start scanning your system for malware. When the scan is finished restart your computer and see if this fixed the "KMODE_EXCEPTION_NOT_HANDLED" error.

run full system scan step 4

[Back to Table of Contents]

Reinstall Your Windows

This method is our last suggestion which could help you to resolve the "KMODE_EXCEPTION_NOT_HANDLED" error. We recommend you to try this when nothing else works. This method is kind of extreme one to deal with problems like this, but it usually helps to fix any problem. However, Reinstalling Windows will erase everything from your hard drive, allowing you to start again with a fresh system. Make sure to back up your files first.

[Back to Table of Contents]

Video Showing How To Fix The "KMODE_EXCEPTION_NOT_HANDLED" Error:

[Back to Top]