What is JB88 ransomware?
JB88 is a malicious program belonging to the Matrix ransomware family. Systems infected with this malware experience data encryption and users receive ransom demands for decryption.
During the encryption process, all affected files are renamed following this pattern: "[Jonbrown88@criptext.com].[random_string].JB88" consisting of the cyber criminals' email address, a string of random characters, and the ".JB88" extension.
For example, a file originally named "1.jpg" would appear as something similar to "[Jonbrown88@criptext.com].4d3dvzR0-xyxlPYD4.JB88" following encryption. After this process is complete, ransom messages within "JB88_README.rtf" files are dropped into compromised folders.
The ransom-demand message ("JB88_README.rtf") informs victims that their data has been encrypted with the АЕS-256 and RSА-2048 cryptographic algorithms. To restore their files, users are instructed to send an email to the addresses provided.
All three of the addresses must be used, as emails sent by victims often do not reach the cyber criminals behind the ransomware attack. Should users fail to receive a response within 24 hours, they must check their "Spam/Junk" email folders.
If a reply is found, it must be moved to the inbox, however, if no response is found, the messages must be resent and the message recommends using a different email service to do so (e.g. Gmail, Yahoo, AOL, etc.). Additionally, decryption can be tested by attaching up to three encrypted files to the emails.
Provided the files do not contain valuable information, they are decrypted and returned. The criminals' response will also contain further instructions about how to recover the compromised data. The message warns victims that if they attempt to deceive the cyber criminals, it will only result in an increase to the ransom size.
In most cases of ransomware infections, decryption is impossible without involvement of the individuals responsible for the attack, unless the malware is still in development and/or has crucial flaws. Whatever the case, you are strongly advised against communicating with and/or paying criminals.
Despite meeting the ransom demands, victims do not receive the promised decryption tools. Therefore, they experience financial loss and their data remains encrypted, essentially, useless. To prevent JB88 ransomware from further encryption, it must be eliminated from the operating system.
Unfortunately, removal will not restore already affected files. The only solution is to recover data from a backup, if one was made prior to the infection and was stored in a different location.
Screenshot of a message encouraging users to pay a ransom to decrypt their compromised data:
Copa, Mount Locker, and Arrow are some examples of other malicious programs within the ransomware classification. They operate by encrypting data and demanding payment for decryption tools. There are two primary differences between these programs/infections: the cryptographic algorithms they use (symmetric or asymmetric) and ransom size.
The demanded payments tend to range from three to four digit sums (in USD). Digital currencies (e.g. cryptocurrencies, pre-paid vouchers, etc.) are often used for the ransoms, since these transactions are difficult/impossible to trace. To avoid permanent data loss, you are strongly advised to keep backups on unplugged storage devices and/or remote servers.
Preferably, backups should be stored in multiple different locations.
How did ransomware infect my computer?
Ransomware and other malware are mainly distributed via Trojans, spam campaigns, illegal activation ("cracking") tools, bogus updaters and untrusted download sources. Trojans are malicious programs with various functionality that can include the capability to cause chain infections (i.e. download/installation of additional malware).
Spam campaigns are mass-scale operations, during which thousands of deceptive/scam emails are sent.
"Cracking" tools can download/install malware, rather than activating licensed programs. Fake updaters cause infections by abusing flaws of outdated programs and/or by installing malicious software, rather than the promised updates.
Dubious download channels such as unofficial and free file-hosting (freeware) sites, Peer-to-Peer sharing networks (BitTorrent, eMule, Gnutella, etc.) and other third party downloaders can offer malware for downloading, disguised as or bundled with normal content.
|Threat Type||Ransomware, Crypto Virus, Files locker.|
|Encrypted Files Extension||Files are renames following this pattern - [Jonbrown88@criptext.com].[random_string].JB88|
|Ransom Demand Message||JB88_README.rtf|
|Cyber Criminal Contact||Jonbrown88@criptext.com, Jonbrown88@aol.com, Jonbrown88@tutanota.com|
|Detection Names||Avast (Win32:RansomX-gen [Ransom]), BitDefender (Generic.Ransom.Matrix.AE9FC992), ESET-NOD32 (A Variant Of Win32/Filecoder.LockedFile.I), Kaspersky (HEUR:Trojan-Ransom.Win32.Agent.gen), Full List Of Detections (VirusTotal).|
|Symptoms||Cannot open files stored on your computer, previously functional files now have a different extension (for example, my.docx.locked). A ransom demand message is displayed on your desktop. Cyber criminals demand payment of a ransom (usually in bitcoins) to unlock your files.|
|Distribution methods||Infected email attachments (macros), torrent websites, malicious ads.|
|Damage||All files are encrypted and cannot be opened without paying a ransom. Additional password-stealing Trojans and malware infections can be installed together with a ransomware infection.|
|Malware Removal (Windows)||
To eliminate possible malware infections, scan your computer with legitimate antivirus software. Our security researchers recommend using Combo Cleaner.
How to protect yourself from ransomware infections
Installed programs must be activated and updated with tools or implemented functions that are provided by the official developers. No other third party, unofficial tools should be used. Note that it is illegal to activate licensed software with ‘cracking’ tools.
Files and programs should be downloaded from official websites and via direct download links. Avoid third party installers and the tools/sources mentioned above. Do not open website links or files in irrelevant emails that are received from unknown, suspicious addresses.
These bogus emails are often disguised as official and important. Regularly, scan your computer with reputable, up-to-date antivirus or anti-spyware software. If your computer is already infected with JB88, we recommend running a scan with Combo Cleaner Antivirus for Windows to automatically eliminate this ransomware.
Text presented in JB88 ransomware text file ("JB88_README.rtf"):
ALL YOUR VALUABLE DATA WAS ENCRYPTED!
All yоur filеs wеrе еnсrуptеd with strоng crуptо аlgоrithm АЕS-256 + RSА-2048.
Plеаsе bе surе thаt yоur filеs аrе nоt brоkеn аnd уоu cаn rеstоrе thеm tоdаy.
If yоu rеаllу wаnt tо rеstоrе yоur filеs plеаsе writе us tо thе е-mаils:
In subjеct linе writе уоur ID: -
Impоrtаnt! Plеаsе sеnd yоur mеssаgе tо аll оf оur 3 е-mаil аddrеssеs. This is rеаllу impоrtаnt bеcаusе оf dеlivеrу prоblеms оf sоmе mаil sеrviсеs!
Important! If you haven't received a response from us within 24 hours, please try to use a different email service (Gmail, Yahoo, AOL, etc).
Important! Please check your SPAM folder each time you wait for our response! If you find our email in the SPAM folder please move it to your Inbox.
Important! We are always in touch and ready to help you as soon as possible!
Аttаch up tо 3 smаll еncrуptеd filеs fоr frее tеst dесryption. Plеаsе nоte thаt thе filеs yоu sеnd us shоuld nоt cоntаin аnу vаluаblе infоrmаtiоn. Wе will sеnd yоu tеst dеcrуptеd files in оur rеspоnsе fоr yоur cоnfidеnсе.
Of course you will receive all the necessary instructions hоw tо dеcrуpt yоur filеs!
Plеаsе nоte that we are professionals and just doing our job!
Please dо nоt wаstе thе timе аnd dо nоt trу to dесеive us - it will rеsult оnly priсе incrеаsе!
Wе аrе alwауs оpеnеd fоr diаlоg аnd rеаdy tо hеlp уоu.
Screenshot of files encrypted by JB88 ("[Jonbrown88@criptext.com].[random_string].JB88" renaming pattern):
JB88 ransomware removal:
Instant automatic malware removal:
Manual threat removal might be a lengthy and complicated process that requires advanced computer skills. Combo Cleaner is a professional automatic malware removal tool that is recommended to get rid of malware. Download it by clicking the button below:
Video suggesting what steps should be taken in case of a ransomware infection:
- What is JB88 virus?
- STEP 1. Reporting ransomware to authorities.
- STEP 2. Isolating the infected device.
- STEP 3. Identifying the ransomware infection.
- STEP 4. Searching for ransomware decryption tools.
- STEP 5. Restoring files with data recovery tools.
- STEP 6. Creating data backups.
If you are a victim of a ransomware attack we recommend reporting this incident to authorities. By providing information to law enforcement agencies you will help track cybercrime and potentially assist in the prosecution of the attackers. Here's a list of authorities where you should report a ransomware attack. For the complete list of local cybersecurity centers and information on why you should report ransomware attacks, read this article.
List of local authorities where ransomware attacks should be reported (choose one depending on your residence address):
- USA - Internet Crime Complaint Centre IC3
- United Kingdom - Action Fraud
- Spain - Policía Nacional
- France - Ministère de l'Intérieur
- Germany - Polizei
- Italy - Polizia di Stato
- The Netherlands - Politie
- Poland - Policja
- Portugal - Polícia Judiciária
Isolating the infected device:
Some ransomware-type infections are designed to encrypt files within external storage devices, infect them, and even spread throughout the entire local network. For this reason, it is very important to isolate the infected device (computer) as soon as possible.
Step 1: Disconnect from the internet.
The easiest way to disconnect a computer from the internet is to unplug the Ethernet cable from the motherboard, however, some devices are connected via a wireless network and for some users (especially those who are not particularly tech-savvy), disconnecting cables may seem troublesome. Therefore, you can also disconnect the system manually via Control Panel:
Navigate to the "Control Panel", click the search bar in the upper-right corner of the screen, enter "Network and Sharing Center" and select search result:
Click the "Change adapter settings" option in the upper-left corner of the window:
Right-click on each connection point and select "Disable". Once disabled, the system will no longer be connected to the internet. To re-enable the connection points, simply right-click again and select "Enable".
Step 2: Unplug all storage devices.
As mentioned above, ransomware might encrypt data and infiltrate all storage devices that are connected to the computer. For this reason, all external storage devices (flash drives, portable hard drives, etc.) should be disconnected immediately, however, we strongly advise you to eject each device before disconnecting to prevent data corruption:
Navigate to "My Computer", right-click on each connected device, and select "Eject":
Step 3: Log-out of cloud storage accounts.
Some ransomware-type might be able to hijack software that handles data stored within "the Cloud". Therefore, the data could be corrupted/encrypted. For this reason, you should log-out of all cloud storage accounts within browsers and other related software. You should also consider temporarily uninstalling the cloud-management software until the infection is completely removed.
Identify the ransomware infection:
To properly handle an infection, one must first identify it. Some ransomware infections use ransom-demand messages as an introduction (see the WALDO ransomware text file below).
This, however, is rare. In most cases, ransomware infections deliver more direct messages simply stating that data is encrypted and that victims must pay some sort of ransom. Note that ransomware-type infections typically generate messages with different file names (for example, "_readme.txt", "READ-ME.txt", "DECRYPTION_INSTRUCTIONS.txt", "DECRYPT_FILES.html", etc.). Therefore, using the name of a ransom message may seem like a good way to identify the infection. The problem is that most of these names are generic and some infections use the same names, even though the delivered messages are different and the infections themselves are unrelated. Therefore, using the message filename alone can be ineffective and even lead to permanent data loss (for example, by attempting to decrypt data using tools designed for different ransomware infections, users are likely to end up permanently damaging files and decryption will no longer be possible even with the correct tool).
Another way to identify a ransomware infection is to check the file extension, which is appended to each encrypted file. Ransomware infections are often named by the extensions they append (see files encrypted by Qewe ransomware below).
This method is only effective, however, when the appended extension is unique - many ransomware infections append a generic extension (for example, ".encrypted", ".enc", ".crypted", ".locked", etc.). In these cases, identifying ransomware by its appended extension becomes impossible.
One of the easiest and quickest ways to identify a ransomware infection is to use the ID Ransomware website. This service supports most existing ransomware infections. Victims simply upload a ransom message and/or one encrypted file (we advise you to upload both if possible).
The ransomware will be identified within seconds and you will be provided with various details, such as the name of the malware family to which the infection belongs, whether it is decryptable, and so on.
Example 1 (Qewe [Stop/Djvu] ransomware):
Example 2 (.iso [Phobos] ransomware):
If your data happens to be encrypted by ransomware that is not supported by ID Ransomware, you can always try searching the internet by using certain keywords (for example, a ransom message title, file extension, provided contact emails, crypto wallet addresses, etc.).
Search for ransomware decryption tools:
Encryption algorithms used by most ransomware-type infections are extremely sophisticated and, if the encryption is performed properly, only the developer is capable of restoring data. This is because decryption requires a specific key, which is generated during the encryption. Restoring data without the key is impossible. In most cases, cybercriminals store keys on a remote server, rather than using the infected machine as a host. Dharma (CrySis), Phobos, and other families of high-end ransomware infections are virtually flawless, and thus restoring data encrypted without the developers' involvement is simply impossible. Despite this, there are dozens of ransomware-type infections that are poorly developed and contain a number of flaws (for example, the use of identical encryption/decryption keys for each victim, keys stored locally, etc.). Therefore, always check for available decryption tools for any ransomware that infiltrates your computer.
Finding the correct decryption tool on the internet can be very frustrating. For this reason, we recommend that you use the No More Ransom Project and this is where identifying the ransomware infection is useful. The No More Ransom Project website contains a "Decryption Tools" section with a search bar. Enter the name of the identified ransomware, and all available decryptors (if there are any) will be listed.
Restore files with data recovery tools:
Depending on the situation (quality of ransomware infection, type of encryption algorithm used, etc.), restoring data with certain third-party tools might be possible. Therefore, we advise you to use the Recuva tool developed by CCleaner. This tool supports over a thousand data types (graphics, video, audio, documents, etc.) and it is very intuitive (little knowledge is necessary to recover data). In addition, the recovery feature is completely free.
Step 1: Perform a scan.
Run the Recuva application and follow the wizard. You will be prompted with several windows allowing you to choose what file types to look for, which locations should be scanned, etc. All you need to do is select the options you're looking for and start the scan. We advise you to enable the "Deep Scan" before starting, otherwise, the application's scanning capabilities will be restricted.
Wait for Recuva to complete the scan. The scanning duration depends on the volume of files (both in quantity and size) that you are scanning (for example, several hundred gigabytes could take over an hour to scan). Therefore, be patient during the scanning process. We also advise against modifying or deleting existing files, since this might interfere with the scan. If you add additional data (for example, downloading files/content) while scanning, this will prolong the process:
Step 2: Recover data.
Once the process is complete, select the folders/files you wish to restore and simply click "Recover". Note that some free space on your storage drive is necessary to restore data:
Create data backups:
Proper file management and creating backups is essential for data security. Therefore, always be very careful and think ahead.
Partition management: We recommend that you store your data in multiple partitions and avoid storing important files within the partition that contains the entire operating system. If you fall into a situation whereby you cannot boot the system and are forced to format the disk on which the operating system is installed (in most cases, this is where malware infections hide), you will lose all data stored within that drive. This is the advantage of having multiple partitions: if you have the entire storage device assigned to a single partition, you will be forced to delete everything, however, creating multiple partitions and allocating the data properly allows you to prevent such problems. You can easily format a single partition without affecting the others - therefore, one will be cleaned and the others will remain untouched, and your data will be saved. Managing partitions is quite simple and you can find all the necessary information on Microsoft's documentation web page.
Data backups: One of the most reliable backup methods is to use an external storage device and keep it unplugged. Copy your data to an external hard drive, flash (thumb) drive, SSD, HDD, or any other storage device, unplug it and store it in a dry place away from the sun and extreme temperatures. This method is, however, quite inefficient, since data backups and updates need to be made regularly. You can also use a cloud service or remote server. Here, an internet connection is required and there is always the chance of a security breach, although it's a really rare occasion.
We recommend using Microsoft OneDrive for backing up your files. OneDrive lets you store your personal files and data in the cloud, sync files across computers and mobile devices, allowing you to access and edit your files from all of your Windows devices. OneDrive lets you save, share and preview files, access download history, move, delete, and rename files, as well as create new folders, and much more.
You can back up your most important folders and files on your PC (your Desktop, Documents, and Pictures folders). Some of OneDrive’s more notable features include file versioning, which keeps older versions of files for up to 30 days. OneDrive features a recycling bin in which all of your deleted files are stored for a limited time. Deleted files are not counted as part of the user’s allocation.
The service is built using HTML5 technologies and allows you to upload files up to 300 MB via drag and drop into the web browser or up to 10 GB via the OneDrive desktop application. With OneDrive, you can download entire folders as a single ZIP file with up to 10,000 files, although it can’t exceed 15 GB per single download.
OneDrive comes with 5 GB of free storage out of the box, with an additional 100 GB, 1 TB, and 6 TB storage options available for a subscription-based fee. You can get one of these storage plans by either purchasing additional storage separately or with Office 365 subscription.
Creating a data backup:
The backup process is the same for all file types and folders. Here’s how you can back up your files using Microsoft OneDrive
Step 1: Choose the files/folders you want to backup.
Click the OneDrive cloud icon to open the OneDrive menu. While in this menu, you can customize your file backup settings.
Click Help & Settings and then select Settings from the drop-down menu.
Go to the Backup tab and click Manage backup.
In this menu, you can choose to backup the Desktop and all of the files on it, and Documents and Pictures folders, again, with all of the files in them. Click Start backup.
Now, when you add a file or folder in the Desktop and Documents and Pictures folders, they will be automatically backed up on OneDrive.
To add folders and files, not in the locations shown above, you have to add them manually.
Open File Explorer and navigate to the location of the folder/file you want to backup. Select the item, right-click it, and click Copy.
Then, navigate to OneDrive, right-click anywhere in the window and click Paste. Alternatively, you can just drag and drop a file into OneDrive. OneDrive will automatically create a backup of the folder/file.
All of the files added to the OneDrive folder are backed up in the cloud automatically. The green circle with the checkmark in it indicates that the file is available both locally and on OneDrive and that the file version is the same on both. The blue cloud icon indicates that the file has not been synced and is available only on OneDrive. The sync icon indicates that the file is currently syncing.
To access files only located on OneDrive online, go to the Help & Settings drop-down menu and select View online.
Step 2: Restore corrupted files.
OneDrive makes sure that the files stay in sync, so the version of the file on the computer is the same version on the cloud. However, if ransomware has encrypted your files, you can take advantage of OneDrive’s Version history feature that will allow you to restore the file versions prior to encryption.
Microsoft 365 has a ransomware detection feature that notifies you when your OneDrive files have been attacked and guide you through the process of restoring your files. It must be noted, however, that if you don’t have a paid Microsoft 365 subscription, you only get one detection and file recovery for free.
If your OneDrive files get deleted, corrupted, or infected by malware, you can restore your entire OneDrive to a previous state. Here’s how you can restore your entire OneDrive:
1. If you're signed in with a personal account, click the Settings cog at the top of the page. Then, click Options and select Restore your OneDrive.
If you're signed in with a work or school account, click the Settings cog at the top of the page. Then, click Restore your OneDrive.
2. On the Restore your OneDrive page, select a date from the drop-down list. Note that if you're restoring your files after automatic ransomware detection, a restore date will be selected for you.
3. After configuring all of the file restoration options, click Restore to undo all the activities you selected.
The best way to avoid damage from ransomware infections is to maintain regular up-to-date backups.