FacebookTwitterLinkedIn

Mlrd (.mlrd) ransomware virus - removal and decryption options

Also Known As: Mlrd virus
Damage level: Severe

What kind of malware is Mlrd?

The Mlrd ransomware, identified as a member of the Djvu family, has been uncovered during a thorough analysis of samples on VirusTotal. This malicious software functions by encrypting data and appending the ".mlrd" extension to the files it targets. Following the encryption process, Mlrd leaves behind a ransom note ("_readme.txt").

Mlrd alters the filenames of affected files according to a specific pattern. For instance, "1.jpg" is transformed into "1.jpg.mlrd" and "2.png" becomes "2.png.mlrd". Given its connection to the Djvu family, Mlrd may be distributed alongside other malicious software, including but not limited to RedLine and Vidar information stealers.

Screenshot of files encrypted by Mlrd ransomware:

Files encrypted by Mlrd ransomware (.mlrd extension)

Mlrd ransom note overview

The ransom note delivered by Mlrd ransomware includes two email addresses (support@freshmail.top and datarestorehelp@airmail.cc) and presents victims with a choice to acquire decryption software and a unique decryption key. The initial cost for decryption services is fixed at $980. Nevertheless, if victims make contact with the threat actors within a 72-hour window, they have the option to procure decryption tools for a reduced rate of $490.

Furthermore, the ransom note mentions that victims can submit a single encrypted file for complimentary decryption. It says that this file should not contain any critical or valuable data.

More about ransomware

It is strongly discouraged to engage in the act of paying the threat actors responsible for ransomware attacks. This course of action provides financial support to cybercriminals and carries a significant risk of victims falling victim to scams, with no guarantee of receiving the promised decryption tools.

Usually, the threat actors are the only ones who can decrypt the files, effectively coercing victims into paying them if they hope to recover access to their encrypted data. Free data recovery can be possible when a third-party decryption tool is available online or when victims have a data backup.

It is crucial to take immediate action to remove ransomware from the infected system to prevent further data loss and potential spread to other computers on the same local network. Ransomware is notorious for its ability to encrypt additional files on the compromised computer, and it can also exploit network vulnerabilities to infect other connected devices.

Ransomware in general

Ransomware, a type of malicious software, is employed by cybercriminals with the aim of denying victims access to their own data. Through the encryption of files, malicious actors are able to effectively seize a victim's data and then request a ransom in exchange for decryption.

In the majority of instances, the decryption of files cannot be accomplished without the involvement of the malicious actors, underscoring the importance of having a backup of critical data. More examples of ransomware variants are Byee, Lapsus$ Group, and SULINFORMATICA.

How did ransomware infect my computer?

Most commonly, users inadvertently infect their computers with Djvu ransomware by executing files obtained from websites that host pirated software and cracking tools, opening malicious files or links in emails used to deliver malware, and falling victim to deceptive web pages that promise downloads of YouTube videos.

In addition to the previously mentioned methods, cybercriminals employ a range of other tactics to deceive users and compromise their computers. These methods include utilizing P2P networks, leveraging third-party downloaders, exploiting free file hosting websites, creating fake software update tools, employing Trojans, and similar deceptive techniques.

The distribution of ransomware typically involves a diverse set of file types, including malicious documents (e.g., MS Office or PDF files), executable files, JavaScript scripts, archives, ISO files, and others.

Threat Summary:
Name Mlrd virus
Threat Type Ransomware, Crypto Virus, Files locker
Encrypted Files Extension .mlrd
Ransom Demanding Message _readme.txt
Free Decryptor Available? Partial (more information below).
Ransom Amount $490/$980
Cyber Criminal Contact support@freshmail.top, datarestorehelp@airmail.cc
Detection Names Avast (Win32:Malware-gen), Bkav Pro (W32.AIDetectMalware), ESET-NOD32 (A Variant Of Win32/Kryptik.HUWY), Kaspersky (UDS:Trojan.Win32.Scarsi), Microsoft (Trojan:Win32/Sabsik.FL.B!ml), Full List Of Detections (VirusTotal)
Symptoms Cannot open files stored on your computer, previously functional files now have a different extension (for example, my.docx.locked). A ransom demand message is displayed on your desktop. Cyber criminals demand payment of a ransom (usually in bitcoins) to unlock your files.
Distribution methods Infected email attachments (macros), torrent websites, malicious ads, pirated software, cracking tools, pages offering to download videos from YouTube, etc.
Damage All files are encrypted and cannot be opened without paying a ransom. Additional password-stealing trojans and malware infections can be installed together with a ransomware infection.
Malware Removal (Windows)

To eliminate possible malware infections, scan your computer with legitimate antivirus software. Our security researchers recommend using Combo Cleaner.
▼ Download Combo Cleaner
To use full-featured product, you have to purchase a license for Combo Cleaner. 7 days free trial available. Combo Cleaner is owned and operated by Rcs Lt, the parent company of PCRisk.com read more.

How to protect yourself from ransomware infections?

Download files and programs exclusively from official and verified sources or stores. Avoid utilizing potentially unsafe sources. Exercise caution when encountering ads on suspicious websites, and be particularly vigilant when it comes to emails containing links or files, especially if they appear irrelevant or unexpected and originate from unfamiliar addresses.

Ensure that your operating system and all installed programs are updated. Employ reputable antivirus software to provide an additional layer of protection against malware and ransomware threats. If your computer is already infected with Mlrd, we recommend running a scan with Combo Cleaner Antivirus for Windows to automatically eliminate this ransomware.

Screenshot of Mlrd's text file ("_readme.txt"):

Mlrd ransomware text file (_readme.txt)

Text in the ransom note:

ATTENTION!

Don't worry, you can return all your files!
All your files like pictures, databases, documents and other important are encrypted with strongest encryption and unique key.
The only method of recovering files is to purchase decrypt tool and unique key for you.
This software will decrypt all your encrypted files.
What guarantees you have?
You can send one of your encrypted file from your PC and we decrypt it for free.
But we can decrypt only 1 file for free. File must not contain valuable information.
You can get and look video overview decrypt tool:
hxxps://we.tl/t-xN3VuzQl0a
Price of private key and decrypt software is $980.
Discount 50% available if you contact us first 72 hours, that's price for you is $490.
Please note that you'll never restore your data without payment.
Check your e-mail "Spam" or "Junk" folder if you don't get answer more than 6 hours.


To get this software you need write on our e-mail:
support@freshmail.top

Reserve e-mail address to contact us:
datarestorehelp@airmail.cc

Your personal ID:
-

There are currently two versions of Djvu ransomware infections: old and new. The old versions were designed to encrypt data by using a hard-coded "offline key" whenever the infected machine had no internet connection or the server was timing out/not responding.

Therefore, some victims were able to decrypt data using a tool developed by cyber security researcher, Michael Gillespie, however, since the encryption mechanism has been slightly changed (hence the new version, released in August, 2019), the decrypter no longer works and it is not supported anymore.

If your data has been encrypted by an older version, you might be able to restore it with the another tool developed by Emsisoft and Michael Gillespie. It supports a total of 148 Djvu's variants and you can find more information, as well as download link and decryption instructions in Emsisoft's official page.

Screenshot of Djvu decryption tool by Emsisoft and Michael Gillespie:

Djvu ransomware decrypter by Michael Gillespie and Emsisoft

Additionally, Emsisoft is now providing a service that allows to decrypt data (again, only if it was encrypted by Djvu variants released before August, 2019) for those victims who have a pair of the same file before and after the encryption. All victims have to do is upload a pair of original and encrypted file to Emsisoft's Djvu decryption page and download the aforementioned decryption tool (the download link will be provided after uploading files).

Note that the file processing may take some time so be patient. It is also worth mentioning that the system must have an Internet connection during the entire decryption process, otherwise it will fail.

Screenshot of Emsisoft's Djvu decryption service page:

Djvu ransomware decryption service by Emsisoft

Some victims state that they've successfully restored a part of encrypted data using PhotoRec tool developed by CGSecurity (Christophe Grenier). You can download this tool from CGSecurity's official website.

Screenshot of PhotoRec application:

PhotoRec restoration tool for Stop/Djvu ransomware

Now it is worth noting that Djvu ransomware does not encrypt the entire file. Instead, it encrypts only a portion (start) of the file, thereby making it unusable. Luckily, in some cases it is possible to restore other part of the file, which is not encrypted. This is useful when it comes to audio/video files, because even though the start won't be restored, you'll still be able to use most of it.

To restore audio/video data we advise you to use Media_Repair tool developed by DiskTuna. This tool is extremely simple and completely free. You can find the user manual as well as download the tool directly from DiskTuna's website.

Screenshot of Media_Repair application developed by DiskTuna:

Media_Repair application by DiskTura restoring audio/video files encrypted by Stop/Djvu ransomware

G DATA company has also released a "vaccine" capable of preventing Djvu ransomware from encrypting data. This does not mean that the malware won't be able to enter the system or to perform other actions (e.g., change system settings). However, the encryption will be prevented nevertheless. You can download the vaccination tool from this GitHub page.

Screenshot of G DATA's Djvu ransomware vaccination tool:

Stop/Djvu ransomware vaccine by G DATA

Video showing how to remove Mlrd ransomware using Combo Cleaner:

Mlrd ransomware removal:

Instant automatic malware removal: Manual threat removal might be a lengthy and complicated process that requires advanced IT skills. Combo Cleaner is a professional automatic malware removal tool that is recommended to get rid of malware. Download it by clicking the button below:
▼ DOWNLOAD Combo Cleaner By downloading any software listed on this website you agree to our Privacy Policy and Terms of Use. To use full-featured product, you have to purchase a license for Combo Cleaner. 7 days free trial available. Combo Cleaner is owned and operated by Rcs Lt, the parent company of PCRisk.com read more.

Video suggesting what steps should be taken in case of a ransomware infection:

Quick menu:

Reporting ransomware to authorities:

If you are a victim of a ransomware attack we recommend reporting this incident to authorities. By providing information to law enforcement agencies you will help track cybercrime and potentially assist in the prosecution of the attackers. Here's a list of authorities where you should report a ransomware attack. For the complete list of local cybersecurity centers and information on why you should report ransomware attacks, read this article.

List of local authorities where ransomware attacks should be reported (choose one depending on your residence address):

Isolating the infected device:

Some ransomware-type infections are designed to encrypt files within external storage devices, infect them, and even spread throughout the entire local network. For this reason, it is very important to isolate the infected device (computer) as soon as possible.

Step 1: Disconnect from the internet.

The easiest way to disconnect a computer from the internet is to unplug the Ethernet cable from the motherboard, however, some devices are connected via a wireless network and for some users (especially those who are not particularly tech-savvy), disconnecting cables may seem troublesome. Therefore, you can also disconnect the system manually via Control Panel:

Navigate to the "Control Panel", click the search bar in the upper-right corner of the screen, enter "Network and Sharing Center" and select search result: Disconnecting computer from the Internet (step 1)

Click the "Change adapter settings" option in the upper-left corner of the window: Disconnecting computer from the Internet (step 2)

Right-click on each connection point and select "Disable". Once disabled, the system will no longer be connected to the internet. To re-enable the connection points, simply right-click again and select "Enable". Disconnecting computer from the Internet (step 3)

Step 2: Unplug all storage devices.

As mentioned above, ransomware might encrypt data and infiltrate all storage devices that are connected to the computer. For this reason, all external storage devices (flash drives, portable hard drives, etc.) should be disconnected immediately, however, we strongly advise you to eject each device before disconnecting to prevent data corruption:

Navigate to "My Computer", right-click on each connected device, and select "Eject": Ejecting external storage devices

Step 3: Log-out of cloud storage accounts.

Some ransomware-type might be able to hijack software that handles data stored within "the Cloud". Therefore, the data could be corrupted/encrypted. For this reason, you should log-out of all cloud storage accounts within browsers and other related software. You should also consider temporarily uninstalling the cloud-management software until the infection is completely removed.

Identify the ransomware infection:

To properly handle an infection, one must first identify it. Some ransomware infections use ransom-demand messages as an introduction (see the WALDO ransomware text file below).

Identify ransomware-type infection (step 1)

This, however, is rare. In most cases, ransomware infections deliver more direct messages simply stating that data is encrypted and that victims must pay some sort of ransom. Note that ransomware-type infections typically generate messages with different file names (for example, "_readme.txt", "READ-ME.txt", "DECRYPTION_INSTRUCTIONS.txt", "DECRYPT_FILES.html", etc.). Therefore, using the name of a ransom message may seem like a good way to identify the infection. The problem is that most of these names are generic and some infections use the same names, even though the delivered messages are different and the infections themselves are unrelated. Therefore, using the message filename alone can be ineffective and even lead to permanent data loss (for example, by attempting to decrypt data using tools designed for different ransomware infections, users are likely to end up permanently damaging files and decryption will no longer be possible even with the correct tool).

Another way to identify a ransomware infection is to check the file extension, which is appended to each encrypted file. Ransomware infections are often named by the extensions they append (see files encrypted by Qewe ransomware below).

Identify ransomware-type infection (step 2)

This method is only effective, however, when the appended extension is unique - many ransomware infections append a generic extension (for example, ".encrypted", ".enc", ".crypted", ".locked", etc.). In these cases, identifying ransomware by its appended extension becomes impossible.

One of the easiest and quickest ways to identify a ransomware infection is to use the ID Ransomware website. This service supports most existing ransomware infections. Victims simply upload a ransom message and/or one encrypted file (we advise you to upload both if possible).

Identify ransomware-type infection (step 3)

The ransomware will be identified within seconds and you will be provided with various details, such as the name of the malware family to which the infection belongs, whether it is decryptable, and so on.

Example 1 (Qewe [Stop/Djvu] ransomware):

Identify ransomware-type infection (step 4)

Example 2 (.iso [Phobos] ransomware):

Identify ransomware-type infection (step 5)

If your data happens to be encrypted by ransomware that is not supported by ID Ransomware, you can always try searching the internet by using certain keywords (for example, a ransom message title, file extension, provided contact emails, crypto wallet addresses, etc.).

Search for ransomware decryption tools:

Encryption algorithms used by most ransomware-type infections are extremely sophisticated and, if the encryption is performed properly, only the developer is capable of restoring data. This is because decryption requires a specific key, which is generated during the encryption. Restoring data without the key is impossible. In most cases, cybercriminals store keys on a remote server, rather than using the infected machine as a host. Dharma (CrySis), Phobos, and other families of high-end ransomware infections are virtually flawless, and thus restoring data encrypted without the developers' involvement is simply impossible. Despite this, there are dozens of ransomware-type infections that are poorly developed and contain a number of flaws (for example, the use of identical encryption/decryption keys for each victim, keys stored locally, etc.). Therefore, always check for available decryption tools for any ransomware that infiltrates your computer.

Finding the correct decryption tool on the internet can be very frustrating. For this reason, we recommend that you use the No More Ransom Project and this is where identifying the ransomware infection is useful. The No More Ransom Project website contains a "Decryption Tools" section with a search bar. Enter the name of the identified ransomware, and all available decryptors (if there are any) will be listed.

Searching for ransomware decryption tools in nomoreransom.org website

Restore files with data recovery tools:

Depending on the situation (quality of ransomware infection, type of encryption algorithm used, etc.), restoring data with certain third-party tools might be possible. Therefore, we advise you to use the Recuva tool developed by CCleaner. This tool supports over a thousand data types (graphics, video, audio, documents, etc.) and it is very intuitive (little knowledge is necessary to recover data). In addition, the recovery feature is completely free.

Step 1: Perform a scan.

Run the Recuva application and follow the wizard. You will be prompted with several windows allowing you to choose what file types to look for, which locations should be scanned, etc. All you need to do is select the options you're looking for and start the scan. We advise you to enable the "Deep Scan" before starting, otherwise, the application's scanning capabilities will be restricted.

Recuva data recovery tool wizard

Wait for Recuva to complete the scan. The scanning duration depends on the volume of files (both in quantity and size) that you are scanning (for example, several hundred gigabytes could take over an hour to scan). Therefore, be patient during the scanning process. We also advise against modifying or deleting existing files, since this might interfere with the scan. If you add additional data (for example, downloading files/content) while scanning, this will prolong the process:

Recuva data recovery tool scan time

Step 2: Recover data.

Once the process is complete, select the folders/files you wish to restore and simply click "Recover". Note that some free space on your storage drive is necessary to restore data:

Recuva data recovery tool recovering data

Create data backups:

Proper file management and creating backups is essential for data security. Therefore, always be very careful and think ahead.

Partition management: We recommend that you store your data in multiple partitions and avoid storing important files within the partition that contains the entire operating system. If you fall into a situation whereby you cannot boot the system and are forced to format the disk on which the operating system is installed (in most cases, this is where malware infections hide), you will lose all data stored within that drive. This is the advantage of having multiple partitions: if you have the entire storage device assigned to a single partition, you will be forced to delete everything, however, creating multiple partitions and allocating the data properly allows you to prevent such problems. You can easily format a single partition without affecting the others - therefore, one will be cleaned and the others will remain untouched, and your data will be saved. Managing partitions is quite simple and you can find all the necessary information on Microsoft's documentation web page.

Data backups: One of the most reliable backup methods is to use an external storage device and keep it unplugged. Copy your data to an external hard drive, flash (thumb) drive, SSD, HDD, or any other storage device, unplug it and store it in a dry place away from the sun and extreme temperatures. This method is, however, quite inefficient, since data backups and updates need to be made regularly. You can also use a cloud service or remote server. Here, an internet connection is required and there is always the chance of a security breach, although it's a really rare occasion.

We recommend using Microsoft OneDrive for backing up your files. OneDrive lets you store your personal files and data in the cloud, sync files across computers and mobile devices, allowing you to access and edit your files from all of your Windows devices. OneDrive lets you save, share and preview files, access download history, move, delete, and rename files, as well as create new folders, and much more.

You can back up your most important folders and files on your PC (your Desktop, Documents, and Pictures folders). Some of OneDrive’s more notable features include file versioning, which keeps older versions of files for up to 30 days. OneDrive features a recycling bin in which all of your deleted files are stored for a limited time. Deleted files are not counted as part of the user’s allocation.

The service is built using HTML5 technologies and allows you to upload files up to 300 MB via drag and drop into the web browser or up to 10 GB via the OneDrive desktop application. With OneDrive, you can download entire folders as a single ZIP file with up to 10,000 files, although it can’t exceed 15 GB per single download.

OneDrive comes with 5 GB of free storage out of the box, with an additional 100 GB, 1 TB, and 6 TB storage options available for a subscription-based fee. You can get one of these storage plans by either purchasing additional storage separately or with Office 365 subscription.

Creating a data backup:

The backup process is the same for all file types and folders. Here’s how you can back up your files using Microsoft OneDrive

Step 1: Choose the files/folders you want to backup.

Click the OneDrive icon in the taskbar

Click the OneDrive cloud icon to open the OneDrive menu. While in this menu, you can customize your file backup settings.

Select Help & Settings and click Settings

Click Help & Settings and then select Settings from the drop-down menu.

Select the Backup tab and click Manage backup

Go to the Backup tab and click Manage backup.

Select folders to backup and click Start backup

In this menu, you can choose to backup the Desktop and all of the files on it, and Documents and Pictures folders, again, with all of the files in them. Click Start backup.

Now, when you add a file or folder in the Desktop and Documents and Pictures folders, they will be automatically backed up on OneDrive.

To add folders and files, not in the locations shown above, you have to add them manually.

Select a file manually and copy it

Open File Explorer and navigate to the location of the folder/file you want to backup. Select the item, right-click it, and click Copy.

Paste the copied file in the OneDrive folder to create a backup

Then, navigate to OneDrive, right-click anywhere in the window and click Paste. Alternatively, you can just drag and drop a file into OneDrive. OneDrive will automatically create a backup of the folder/file.

File statuses in OneDrive folder

All of the files added to the OneDrive folder are backed up in the cloud automatically. The green circle with the checkmark in it indicates that the file is available both locally and on OneDrive and that the file version is the same on both. The blue cloud icon indicates that the file has not been synced and is available only on OneDrive. The sync icon indicates that the file is currently syncing.

Click Help & Settings and click View Online

To access files only located on OneDrive online, go to the Help & Settings drop-down menu and select View online.

Click the Settings cog and click Options

Step 2: Restore corrupted files.

OneDrive makes sure that the files stay in sync, so the version of the file on the computer is the same version on the cloud. However, if ransomware has encrypted your files, you can take advantage of OneDrive’s Version history feature that will allow you to restore the file versions prior to encryption.

Microsoft 365 has a ransomware detection feature that notifies you when your OneDrive files have been attacked and guide you through the process of restoring your files. It must be noted, however, that if you don’t have a paid Microsoft 365 subscription, you only get one detection and file recovery for free.

If your OneDrive files get deleted, corrupted, or infected by malware, you can restore your entire OneDrive to a previous state. Here’s how you can restore your entire OneDrive:

restore-your-onedrive

1. If you're signed in with a personal account, click the Settings cog at the top of the page. Then, click Options and select Restore your OneDrive.

If you're signed in with a work or school account,  click the Settings cog at the top of the page. Then, click Restore your OneDrive.

2. On the Restore your OneDrive page, select a date from the drop-down list. Note that if you're restoring your files after automatic ransomware detection, a restore date will be selected for you.

3. After configuring all of the file restoration options, click Restore to undo all the activities you selected.

The best way to avoid damage from ransomware infections is to maintain regular up-to-date backups.

Frequently Asked Questions (FAQ)

How was my computer hacked and how did hackers encrypt my files?

Attackers succeed in their objectives when users unwittingly trigger ransomware on their devices. It often occurs when users engage with files obtained from websites disseminating pirated software, key generators, or deceptive sites pretending to offer YouTube video downloads. Additionally, malware can breach systems through malicious email attachments (or links sent via emails), misleading advertisements, third-party downloaders, etc.

How to open ".mlrd" files?

Due to a ransomware attack, your files have been encrypted, and to restore access and recover your files, you will need a decryption tool.

How can I decrypt ".mlrd" files for free?

Djvu ransomware often utilizes an online encryption key, complicating the decryption process without the attackers' help. In certain cases, it employs an offline key. Emsisoft provides dedicated decryption software tailored for Djvu ransomware, proving especially useful when the ransomware employs an offline key. Additional information is available here.

Should I pay a ransom?

It is highly advised not to yield to the demands of cybercriminals by making ransom payments. There is no assurance that they will provide decryption tools, and complying with their demands can motivate more attacks on users.

Will Combo Cleaner help me remove Mlrd ransomware?

Combo Cleaner can eliminate ransomware infections from your computer, representing an important initial step in addressing the problem. It is important to understand, however, that the removal of ransomware does not make the encrypted data accessible.

▼ Show Discussion

About the author:

Tomas Meskauskas

Tomas Meskauskas - expert security researcher, professional malware analyst.

I am passionate about computer security and technology. I have an experience of over 10 years working in various companies related to computer technical issue solving and Internet security. I have been working as an author and editor for pcrisk.com since 2010. Follow me on Twitter and LinkedIn to stay informed about the latest online security threats. Contact Tomas Meskauskas.

PCrisk security portal is brought by a company RCS LT. Joined forces of security researchers help educate computer users about the latest online security threats. More information about the company RCS LT.

Our malware removal guides are free. However, if you want to support us you can send us a donation.

About PCrisk

PCrisk is a cyber security portal, informing Internet users about the latest digital threats. Our content is provided by security experts and professional malware researchers. Read more about us.

Malware activity

Global malware activity level today:

Medium threat activity

Increased attack rate of infections detected within the last 24 hours.

QR Code
Mlrd virus QR code
Scan this QR code to have an easy access removal guide of Mlrd virus on your mobile device.
We Recommend:

Get rid of Windows malware infections today:

▼ REMOVE IT NOW
Download Combo Cleaner

Platform: Windows

Editors' Rating for Combo Cleaner:
Editors ratingOutstanding!

[Back to Top]

To use full-featured product, you have to purchase a license for Combo Cleaner. 7 days free trial available. Combo Cleaner is owned and operated by Rcs Lt, the parent company of PCRisk.com read more.